Installation Procedure

Fig 1: Identifying Door Lock Cylinder

Courtesy of GENERAL MOTORS CORP.

Fig 2: View of Door Outside Handle

Courtesy of GENERAL MOTORS CORP.

Install the door outside handle (1).
Install the door outside handle bolts (3).
Place the door outside handle in the closed position.
Push the lower end of the door outside handle rod into the retainer on the door lock actuator. Close the retainer.

Fig 3: Identifying Door Lock Cylinder

Courtesy of GENERAL MOTORS CORP.

Install the door lock cylinder rod to the front door lock cylinder (4).
Install the front door water deflector. Refer to Water Deflector Replacement - Front Door .