LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Back Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: View Of Seat Back Recliner Bolts
    GM900025Courtesy of GENERAL MOTORS CORP.
  1. Align the seat back assembly to the recliners.

    Slide the assembly downward along the recliners until the fastener openings are aligned.

    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the seat back recliner bolts.

    Tighten:  Tighten the bolts to 18 N.m (13 lb ft).

    3. Fig 2: View Of Seat Back Cover Replacement
    GM740564Courtesy of GENERAL MOTORS CORP.
  3. Reposition the seat back cover to a desired appearance.
  4. Route the recliner cable onto the cushion frame.
    5. Fig 3: Identifying J-Hook Retainer & Bottom Of Seat Back Cover
    GM740555Courtesy of GENERAL MOTORS CORP.
  5. Fasten the J-hook retainer (2) at the bottom of the seat back cover (1).
  6. Install the bucket seat. Refer to Seat Replacement .
  7. Return the seat back to the original position.
scientia non olet · About LEMON Manuals