LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Repair Instructions >> Amplifier Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View of Amplifier Bracket Screws
    GM800722Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector (1) to the amplifier (2).
  2. Install the amplifier (2) to the left wheelhouse slots, sliding in and down.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Tighten the nuts (3) to the amplifier bracket.

    Tighten:  Tighten the nuts to 3.5 N.m (31 lb in).

  5. Install the rear compartment trim on the left side. Refer to Compartment Trim Panel Replacement - Rear in Body Rear End.