Scan Tool Output Controls
Radio Scan Tool Output Control
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| Chime Tone 1 | Chime Tone Test | Commanding the test ON will generate a 750 Hz tone that is audible from all speakers capable of generating this frequency. Commanding the test OFF will exit the test. The audio system will resume normal operation. |
| Chime Tone 2 | Chime Tone Test | Commanding the test ON will generate a 2 kHz tone that is audible from all speakers capable of generating this frequency. Commanding the test OFF will exit the test. The audio system will resume normal operation. |
| Chime Tone 3 | Chime Tone Test | Commanding the test ON will generate a 10 kHz tone that is audible from all speakers capable of generating this frequency. Commanding the test OFF will exit the test. The audio system will resume normal operation. |
| Left Front Speaker | Front Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding one speaker OFF will turn off all speakers. |
| Left Rear Speaker | Rear Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding one speaker OFF will turn off all speakers. |
| Right Front Speaker | Front Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding one speaker OFF will turn off all speakers. |
| Right Rear Speaker | Rear Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding one speaker OFF will turn off all speakers. |