LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Cable Replacement >> Installation Procedure

Installation Procedure

    IMPORTANT: The ribbon must not be twisted.
    Fig 1: View of Cruise Control Cable Slug & Ribbon Buckle
    GM792961Courtesy of GENERAL MOTORS CORP.
  1. Connect the cruise control cable slug to the ribbon buckle.
    2. Fig 2: Aligning Cruise Control Cable
    GM329483Courtesy of GENERAL MOTORS CORP.
  2. Insert the cruise control cable into the cruise control module until the seal touches the module.
  3. Position the narrow cable tab into the narrow slot and the wide tab into the wide slot.
    4. IMPORTANT: The adjuster tab must be pointing toward the front of the car after installation.
  4. Connect the cruise control cable to the cruise control module by turning the cable clockwise.
  5. Install the cruise control cable to the retainer clip on the engine.
  6. Install the cruise control cable to the throttle body bracket pressing into place until fully seated.
    7. Fig 3: View Of Cruise Control Cable At Throttle Body Cam Lever
    GM792955Courtesy of GENERAL MOTORS CORP.
  7. Open the throttle body cam slightly.
  8. Connect the cruise control cable to the throttle body cam lever.
scientia non olet · About LEMON Manuals