LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Chevy Express G2500, Van Cargo Extended, 6.0 U >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System - 4.3L (Introduction)) >> Repair Instructions >> Ignition Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine cover. Refer to Engine Cover Replacement in Interior Trim.
    2. Fig 1: Exploded View Ignition Control Module
    GM690078Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector (3).
  3. Remove the screws (4) holding the ignition control module (2) and the heat sink (1) to the bracket.
  4. Remove the ignition control module and the heat sink.
scientia non olet · About LEMON Manuals