LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Chevy Express G2500, Van Cargo Extended, 6.0 U >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System - 4.3L (Introduction)) >> Repair Instructions >> Accelerator Controls Cable Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Accelerator Cable At Bulkhead
    GM26786Courtesy of GENERAL MOTORS CORP.
  1. Install the accelerator cable to the bulkhead (1).
    2. Fig 2: View Of Accelerator Cable At Accelerator Pedal
    GM26784Courtesy of GENERAL MOTORS CORP.
  2. Install the accelerator cable to the accelerator pedal (2).
    3. Fig 3: View Of Accelerator Cable At Engine Cable Bracket
    GM325557Courtesy of GENERAL MOTORS CORP.
  3. Install the accelerator cable to the engine cable bracket.
    4. Fig 4: Identifying Accelerator Cable/Throttle Body Lever
    GM325556Courtesy of GENERAL MOTORS CORP.
  4. Install the accelerator cable to the throttle lever.
  5. Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
  6. Install the engine cover. Refer to Engine Cover Replacement in Interior Trim.
scientia non olet · About LEMON Manuals