LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Chevy Express G2500, Van Cargo Extended, 4.3 X, 4L60E/M30 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.3L (Introduction) >> Repair Instructions >> Throttle Position (TP) Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement in Interior Trim.
    2. Fig 1: View Of TP Sensor Harness Connector
    GM12885Courtesy of GENERAL MOTORS CORP.
  2. Remove the throttle position (TP) sensor harness connector.
    3. Fig 2: View Of TP Sensor Attaching Fasteners
    GM10935Courtesy of GENERAL MOTORS CORP.
  3. Remove the TP sensor attaching fasteners.
    4. NOTE: The TP sensor is an electrical component. Do not soak the TP sensor in any liquid cleaner or solvent as damage may result.
    Fig 3: View Of TP Sensor
    GM10936Courtesy of GENERAL MOTORS CORP.
  4. Remove the TP sensor from the throttle body assembly.
scientia non olet · About LEMON Manuals