LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Cavalier Base, 2D Coupe, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.2L (L61) Introduction >> Repair Instructions >> Air Cleaner Outlet Resonator Replacement >> Installation Procedure

Installation Procedure

  1. Install the air cleaner resonator to the throttle body.
  2. Connect the vent hose to the air cleaner resonator.
    Fig 1: View Of Air Cleaner Outlet Resonator
    GM785334Courtesy of GENERAL MOTORS CORP.
  3. Move the spring clamp over the air cleaner resonator vent port and vent hose.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  4. Tighten the resonator to throttle body clamp.

    Tighten:  Tighten the clamp to 5 N.m (44 lb in).

    Fig 2: Locating IAT Sensor
    GM785335Courtesy of GENERAL MOTORS CORP.
  5. Connect the IAT sensor harness connector.
  6. Connect the vacuum pipe to the air cleaner resonator.
  7. Connect the air cleaner intake duct to the air cleaner resonator.

    Tighten:  Tighten the air cleaner intake duct clamp to 5 N.m (44 lb in).

scientia non olet · About LEMON Manuals