LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Seat System) >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the power seat switch electrical connector.
    Fig 1: View Of Power Seat Switch Electrical Connector
    GM300124Courtesy of GENERAL MOTORS CORP.
  2. Install the power seat switch.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the screws that retain the power seat switch to the seat.

    Tighten:  Tighten the power seat switch retaining screws to 2 N.m (18 lb in).

    Fig 2: Identifying Power Seat Switch Screws
    GM300121Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals