LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat back frame.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts to the seat back hinges on the right and left side.

    Tighten:  Tighten the bolts to the seat back hinges on the right and left side to 30 N.m (22 lb in).

    Fig 1: Locating RH Seat Back Hinge Bolts
    GM300213Courtesy of GENERAL MOTORS CORP.
  3. Install the lumbar support cable. Refer to Lumbar Support Cable Replacement .
  4. Install the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement (YC5 and YC6)  or Seat Back Cover and Pad Replacement (YC7) .
    Fig 2: Seat Back Cover View
    GM300212Courtesy of GENERAL MOTORS CORP.
  5. Install the bucket seat in the vehicle. Refer to Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals