LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Blazer 2D Utility, 4WD, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Controls - 4.3L - Introduction) >> Repair Instructions >> Fuel Strainer Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new fuel strainer (2) in the same position as noted during disassembly. Push the strainer on the bottom of the fuel sender until the strainer is fully seated.
    Fig 1: Identifying Fuel Sender Assembly
    GM371000Courtesy of GENERAL MOTORS CORP.
  2. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .