LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Blazer 2D Utility, 4WD, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Battery, Charging System & Starting System) >> Repair Instructions >> Battery Negative Cable Disconnect/Connect Procedure >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the battery ground (negative) cable and bolt to the battery.

Tighten:  Tighten the battery terminal bolt to 15 N.m (11 lb ft).

Fig 1: View Of Battery Ground (Negative) Cable & Bolt
GM368386Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals