LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Blazer 2D Utility, 4WD, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Disc Brake System) >> Repair Instructions >> Disc Brake Splash Shield Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Brake Dust Caution in Cautions and Notices.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assembly. Refer toTire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the hub and bearing assembly (4). Refer to Wheel Hub, Bearing, and Seal Replacement (RWD)Wheel Hub, Bearing, and Seal Replacement (AWD) in Front Suspension.
  4. Remove the splash shield (6).
    Fig 1: View Of Brake Rotor
    GM913491Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals