LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Astro Van Cargo, RWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pulley Replacement >> Installation Procedure

Installation Procedure

  1. Place the power steering pump pulley on the end of the power steering pump shaft.
    Fig 1: View Of Power Steering Pump Pulley Installer
    GM643361Courtesy of GENERAL MOTORS CORP.
  2. Install the power steering pump pulley using J 25033-C  .
  3. Ensure that the power steering pump pulley (1) is flush against the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.010 in).
    Fig 2: Checking Power Steering Pump Pulley Installed Depth
    GM245012Courtesy of GENERAL MOTORS CORP.
  4. Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical 4.3L.
  5. Install the lower fan shroud. Refer to Fan Shroud Replacement - Lower in Engine Cooling.
scientia non olet · About LEMON Manuals