LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Case - NVG 136-NP4 >> Repair Instructions >> Transfer Case Motor/Encoder Replacement >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the engine brace mounting bolt.
    Fig 1: Locating Engine Brace Mounting Bolt
    GM648043Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine brace.
  4. Remove the front propeller shaft. Refer to Propeller Shaft Replacement - Front in Propeller Shaft.
  5. Remove the motor/encoder electrical connector.
    Fig 2: Identifying Motor/Encoder Electrical Connector
    GM648014Courtesy of GENERAL MOTORS CORP.
  6. Remove the motor/encoder mounting bolts.
    Fig 3: Locating Motor/Encoder Mounting Bolts
    GM648008Courtesy of GENERAL MOTORS CORP.
  7. Remove the motor/encoder assembly.
    Fig 4: View Of Motor/Encoder Assembly
    GM651492Courtesy of GENERAL MOTORS CORP.
  8. Remove the motor/encoder gasket.
    Fig 5: Identifying Motor/Encoder Gasket
    GM648015Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals