Removal Procedure

Remove the trim panel. Refer to Trim Panel Replacement - Door .
Use a sharp bladed tool in order to separate the water deflector at the perforations. Refer to Water Deflector Replacement - Front Door .
Remove the lock rods from the remote lock lever.

Fig 1: View Of Remote Lock Lever Lock Rods
Courtesy of GENERAL MOTORS CORP.
Use a 5 mm (3/16 in) drill bit in order to drill out the head of the door rivets and remove the remote lock lever to door rivets.
Remove the lock lever from the clip (2).

Fig 2: Expanded View Of Lock Lever Rod & Clip
Courtesy of GENERAL MOTORS CORP.
Remove the lock lever from the door.