LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Cruise Control System) >> Repair Instructions >> Cruise Control Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Cable From Throttle Lever & Accelerator Control Cable Bracket
G01813574Courtesy of GENERAL MOTORS CORP.
  1. Remove the cable from the throttle lever and accelerator control cable bracket.
  2. Rotate the cable counter clockwise at the module in order to remove the cable from the module.
  3. Remove the cable from the module band.
    Fig 2: Removing Cable From Module Band
    G01813575Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals