LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Hanger Replacement >> Installation Procedure

Installation Procedure

  1. Install the catalytic converter hanger.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the catalytic converter hanger bolts.

    Tighten 

    Tighten the catalytic converter hanger bolts to 35 N.m (36 lb ft).

  3. Install the catalytic converter hanger insulators to the catalytic converter.
  4. Lower the vehicle.
    Fig 1: Installing Catalytic Converter Hanger
    G01485990Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals