LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Automatic Transaxle Servicing) >> Removal & Installation >> Low-Reverse Servo Assembly >> Removal

Low-Reverse Servo Assembly: Removal

WARNING: This page is about a different car, the 2003 Pontiac Grand Am and 2003 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the oil pan and filter. See DRAINING & REFILLING  under LUBRICATION.
  3. Remove the oil feed pipes. See OIL FEED PIPES  .
  4. Remove the 3 low and reverse band servo cover bolts, the servo and the spring. See Fig 1 .
  5. Disassemble, clean and inspect the low-reverse servo assembly.
Fig 1: Removing & Installing Low-Reverse Servo
G00088296Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals