Preliminary Inspection
- Verify on-board diagnostics are working by performing DIAGNOSTIC SYSTEM CHECK - ENGINE CONTROLS in SELF-DIAGNOSTICS - 2.0L TRACKER or SELF-DIAGNOSTICS - 2.5L TRACKER article.
- Ensure PCM and MIL functions properly.
- Ensure no DTCs (except intermittent) are stored.
- Ensure fuel control system operates properly. See FUEL SYSTEMS in BASIC DIAGNOSTIC PROCEDURES - 2.0L & 2.5L TRACKER article.
- Perform fuel system pressure test.
- Visually inspect all systems.
After all checks have been performed, verify customer complaint and locate correct symptom. Check items indicated under that symptom. See SYMPTOMS .