LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation >> Miscellaneous >> Accelerator Controls Cable >> Removal

Accelerator Controls Cable: Removal

  1. Disconnect the accelerator control cable from the accelerator pedal. See Figure. Push the accelerator control cable through the bulkhead grommet.
  2. Disconnect the accelerator control cable from the throttle body by rotating the throttle lever to wide open throttle and removing the cable end from the slot. See Figure.
  3. Loosen the accelerator control cable locknut and the accelerator control cable adjusting nut. Remove the accelerator control cable from the vehicle.

scientia non olet · About LEMON Manuals