LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> System Tests >> Test B: Charge Indicator Always On

Test B: Charge Indicator Always On

  1. Check generator mounting. Check wiring harness electrical connections at generator. Check battery cables. Check drive belt tension. Ensure battery is fully charged. See BATTERY TESTING & INSPECTION  under ON-VEHICLE TESTING. Reviewing the description and operation information will help determine the correct symptom diagnostic procedure when a malfunction exists and will also help determine if the condition described by the customer is normal operation. See DESCRIPTION & OPERATION  . If review was performed, go to next step.
  2. Start engine. If battery charge indicator light remains illuminated after 5 second bulb check, go to next step. If battery charge indicator light does not remain illuminated after 5 second bulb check, problem is intermittent. Check wiring and connections.
  3. Connect scan tool to Data Link Connector. Using scan tool, observe BATTERY VOLTAGE parameter in POWERTRAIN DATA LIST. If voltage is 10-15 volts, go to next step. If voltage is not 10-15 volts, go to TEST A: CHARGING SYSTEM TEST  .
  4. Repair short to ground in White/Red wire between generator and instrument cluster. See WIRING DIAGRAMS  . After repairs, go to next step.
  5. Operate system to verify repair. If condition was found and corrected, system is okay. If condition was not found, go to step  3 .
scientia non olet · About LEMON Manuals