LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Silverado 2500, 4D Pickup Extra Cab, Part Time >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Lumbar Switch Replacement >> Installation Procedure

Installation Procedure

  1. Install the lumbar switch to the power seat switch bezel.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the lumbar switch screws.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  3. Install the power seat switch bezel (1) to the seat. Refer to Seat Switch Bezel Replacement   . 
    Fig 1: Installing Lumbar Switch & Screws
    G01579237Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals