LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Silverado 2500, 4D Pickup Extra Cab, Part Time >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Heated Seat Switch Replacement-Rear >> Installation Procedure

Installation Procedure

  1. Install the switch to the console panel.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the retaining screw.

    Tighten 

    Tighten the screws to 1.6 N.m (14 lb in).

  3. Connect the electrical connector.
  4. Install the center console end panel. Refer to CENTER CONSOLE END PANEL REPLACEMENT .
    Fig 1: Rear Heated Seat Switch
    G01579297Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals