LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (Front Drive Axle) >> Repair Instructions >> Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the front differential carrier shield.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the front differential carrier shield bolts.

    Tighten 

    Tighten the front differential carrier shield bolts to 20 N.m (15 lb ft).

  3. Lower the vehicle.
    Fig 1: Front Differential Carrier Shield & Bolts
    G01480371Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals