LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Replacement-Rear (60/40 Split) >> Installation Procedure

Installation Procedure

  1. Install the seat into the vehicle.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the seat retaining bolts.

    Tighten 

    Tighten the bolts to 55 N.m (41 lb ft).

  3. Connect the electrical connectors, if equipped.
  4. Install the jack assembly, if removed.
  5. Install the covers to the seat bolts.
  6. Install the seat back recliner handle screw, if removed.

    Tighten 

    Tighten the screw to 2 N.m (18 lb in).

  7. Install the front and the rear leg trim covers.
    Fig 1: Rear Seat (60/40 Split)
    G01579283Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals