LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> SSR LS >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Switch Bezel Replacement >> Installation Procedure

Installation Procedure

  1. Install the heated seat switch to the switch bezel, verifying that the retaining tabs are fully seated. Refer to Heated Seat Switch Replacement - Front .
  2. Install the seat switch to the switch bezel, verifying that the retaining tabs are fully seated. Refer to Seat Switch Replacement - Power .
    3. Fig 1: View of Switch Bezel to Seat Screws
    GM1200435Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the switch bezel to the seat with the 3 screws.

    Tighten:  Tighten the seat switch bezel screws to 1.5 N.m (13 lb in).

  4. Install the seat cushion outer trim panel to the seat assembly. Refer to Seat Cushion Outer Trim Panel Replacement .
  5. Install the seat in the vehicle. Refer to Seat Replacement .
scientia non olet · About LEMON Manuals