LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> SSR LS >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Belt Guide Replacement - Front >> Installation Procedure

Installation Procedure

  1. Install the seat belt guide onto the seat back frame studs.
  2. Install the filler piece (2).
    3. Fig 1: Identifying Nuts & Filler Piece
    GM1200404Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the seat belt guide to the seat back frame with 2 new dual-component epoxy lock-nuts (1).

    Tighten:  Tighten the seat belt guide nuts to 11 N.m (8 lb ft).

  4. Install the chrome head restraint trim to the headrest. Refer to Chrome Head Restraint Trim Replacement .
  5. Feed the seat belt through the seat guide loop and install the seat belt anchor bolt. Refer to Seat Belt Replacement - Front in Seat Belts.
scientia non olet · About LEMON Manuals