LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> SSR LS >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Heated Seat Switch Replacement - Front >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector on the heated seat switch harness to the seat wiring harness.
    2. Fig 1: Identifying Seat Switch & Bezel
    GM1293225Courtesy of GENERAL MOTORS CORP.
  2. Install the heated seat switch (2) to the seat switch bezel (3) by snapping the switch assembly into the bezel. Verify that the retaining tabs (1) are fully seated.
  3. Install the seat switch bezel. Refer to Seat Switch Bezel Replacement .
  4. Install the seat cushion outer trim panel to the seat assembly. Refer to Seat Cushion Outer Trim Panel Replacement .
scientia non olet · About LEMON Manuals