LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Stabilizer Shaft, Insulator, Insulator Clamp & Mounting Bolts
    GM1257519Courtesy of GENERAL MOTORS CORP.
  1. Install the stabilizer shaft insulator to stabilizer shaft with slit facing the front of the vehicle.
  2. Install the stabilizer shaft insulator clamp to the stabilizer shaft insulator.
    3. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the stabilizer shaft insulator clamp mounting bolts.

    Tighten:  Tighten the stabilizer shaft insulator clamp mounting bolts to 55 N.m (41 lb ft).

  4. Lower the vehicle.
scientia non olet · About LEMON Manuals