LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Coolant Air Bleed Pipe Assembly Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Coolant Air Bleed Pipe And Bolts
    GM741555Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold only if servicing the rear air bleed plugs. Refer to Intake Manifold Replacement in Engine Mechanical - 4.8L, 5.3L, and 6.0L.
  2. Remove the coolant air bleed pipe bolts (1).
    3. Fig 2: Identifying Coolant Air Bleed Pipe And Bolts
    GM741555Courtesy of GENERAL MOTORS CORP.
  3. Remove the coolant air bleed pipe (2) with gaskets (3).
  4. Remove the gaskets from the coolant air bleed pipe and covers.
  5. Discard the gaskets.
    6. Fig 3: Coolant Air Bleed Hose & Pipe
    GM790766Courtesy of GENERAL MOTORS CORP.
  6. Remove the coolant air bleed hose (1) from the pipe (2).
scientia non olet · About LEMON Manuals