Test Description
The number below refers to the step number on the diagnostic table.
- 4: If the front tires are not the same size as the rear tires, the EBCM calibration must match the FRONT tire size and the PCM calibration must match the REAR tire size.
DTC C0238
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you perform the ABS Diagnostic System Check? | Go to Step 2 | Go to Diagnostic System Check - ABS . |
| 2 | Inspect both of the front tires on the vehicle to ensure that both tires are of equal size. Are both of the front tires of equal size? |
Go to Step 3 | Go to Diagnostic Aids |
| 3 | Inspect both of the rear tires on the vehicle to ensure that both tires are of equal size. Are both of the rear tires of equal size? |
Go to Step 4 | Go to Diagnostic Aids |
| 4 | Verify the EBCM and the PCM both have the correct tire size calibration. Use the scan tool in order to view the EBCM tire size calibration or perform the Tire Size Calibration procedure and refer to Service Programming System (SPS) (Remote Procedure)
or Service Programming System (SPS) (Pass-Thru Procedure)
or Service Programming System (SPS) (Off Board Remote Procedure)
or Service Programming System (SPS) (Off Board Pass-Thru Procedure)
in Programming. Did you find and correct the condition? |
Go to Step 5 | Go to Diagnostic Aids |
| 5 |
|
Go to Step 2 | System OK |