Installation Procedure
- Install the wiper motor into the vehicle.
- Connect the wiper motor electrical connector.
- Install the wiper motor fasteners.
Tighten: Tighten the wiper motor fasteners to 10 N.m (88 lb in).
- Install the wiper transmission. Refer to Wiper Transmission Replacement .
- Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
- Install the wiper arms. Refer to Wiper Arm Replacement .
- Close the hood.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.