LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Washer Solvent Container Replacement >> Installation Procedure

Installation Procedure

  1. Install the washer solvent container into the vehicle.
  2. Connect the washer solvent hose to the washer pump.
    3. Fig 1: View of Washer Solvent Container
    GM1244685Courtesy of GENERAL MOTORS CORP.
  3. Push down to seat the washer solvent container into the vehicle.
    4. Fig 2: Identifying Washer Solvent Container Fasteners
    GM1244677Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  4. Install the washer solvent container fasteners.

    Tighten:  Tighten the fasteners to 10 N.m (88 lb in).

  5. Install the PCM. Refer to Powertrain Control Module (PCM) Replacement in Engine Controls - 4.8L, 5.3L, and 6.0L.
  6. Close the hood.
scientia non olet · About LEMON Manuals