LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Brake Pedal Pin
    GM1335248Courtesy of GENERAL MOTORS CORP.
  1. Locate the brake switch to the vehicle.
  2. Connect the electrical connector to the brake switch.
  3. Install the brake switch to the brake pedal pin.
  4. Install the retaining clip to the brake pedal pin (1).
scientia non olet · About LEMON Manuals