LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Repair Instructions >> Radio Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View of Radio to I/P Fasteners
    GM1332988Courtesy of GENERAL MOTORS CORP.
  1. Connect the radio antenna coax cable.
  2. Connect the electrical connectors.
  3. Position the radio onto the I/P.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  4. Install the fasteners securing the radio to the I/P.

    Tighten:  Tighten the fasteners to 9 N.m (80 lb in).

  5. Remove the center I/P trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center in Instrument Panel, Gages, and Console.
  6. Remove the left I/P trim panel. Refer to Instrument Panel (I/P) Trim Panel Replacement - Left in Instrument Panel, Gages, and Console.
  7. Remove the right I/P trim panel. Refer to Instrument Panel (I/P) Trim Panel Replacement - Right in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals