LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Repair Instructions >> Amplifier Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View of Folding Top
    GM1362522Courtesy of GENERAL MOTORS CORP.
  1. Cycle the folding top to reveal the body rear accessory compartment.
  2. Turn the ignition switch to the OFF position.
    3. Fig 2: Identifying Body Accessory Compartment Lid Nuts
    GM1386454Courtesy of GENERAL MOTORS CORP.
  3. Loosen the nuts and remove the lid from the body accessory compartment.
  4. Remove the folding top control module. Refer to Folding Top Control Module Replacement in Roof.
  5. Remove the rear relay center. Refer to Rear Electrical Center or Junction Block Replacement in Wiring Systems.
  6. Remove the daytime running lamps (DRL) diode. Refer to Daytime Running Lamps (DRL) Diode Replacement in Lighting Systems.
    7. Fig 3: View of Intermediate Bracket Fasteners
    GM1344058Courtesy of GENERAL MOTORS CORP.
  7. Remove the 4 fasteners retaining the intermediate bracket.
    8. Fig 4: Identifying Amplifier Electrical Connectors & Fasteners
    GM1344086Courtesy of GENERAL MOTORS CORP.
  8. Disconnect the electrical connectors to the amplifier (3).
  9. Remove the 4 fasteners (1, 2) retaining the amplifier to the body rear accessory compartment.
  10. Remove the amplifier from the vehicle.
scientia non olet · About LEMON Manuals