Test Description
The number below refers to the step number on the diagnostic table.
- 4: Locating and repairing an individual condition may correct more than one DTC.
DTC P2108
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Engine Controls Schematics Connector End View Reference: Engine Controls Connector End Views or Powertrain Control Module (PCM) Connector End Views |
|||
| 1 | Did you perform the Diagnostic System Check - Engine Controls? | Go to Step 2 | Go to Diagnostic System Check - Engine Controls |
| 2 | Replace the throttle actuator control (TAC) module. Refer to Throttle Actuator Control (TAC) Module Replacement
. Did you complete the replacement? |
Go to Step 3 | - |
| 3 |
|
Go to Step 2 | Go to Step 4 |
| 4 | Observe the Capture Info with a scan tool. Are there any DTCs that have not been diagnosed? |
Go to Diagnostic Trouble Code (DTC) List | System OK |