Driver Seat Module (DSM)

Displays the voltage of the battery positive supply circuit to the driver seat module.

Displays the number of ignition cycles on/off since the DTC set.

Displays On while the switch is in the high or low positions and Off in the off position.

Displays On while the switch is in the high or low positions and Off in the off position.

Displays the current status of the seat horizontal adjuster switch forward, backward, or inactive.

Displays the current state of the horizontal motor.

Displays the current status of the seat rear vertical adjuster switch up, down, or inactive.

Displays the current state of the rear vertical motor.

Displays the current status of the seat front vertical adjuster switch up, down, or inactive.

Displays the current state of the front vertical motor.

Displays the current state of the horizontal lumbar motor.

Displays the current status of the seat lumbar switch. The scan tool will display the direction that the lumbar switch is being operated.

The scan tool displays the voltage level of the seat heat sensor signal circuit to the driver seat module. When the seat is cold the scan tool will display near 5 volts and as the seat temperature rises the signal voltage will decrease to near 0.0 volts.

The scan tool displays the voltage level of the seat heat sensor signal circuit to the driver seat module. When the seat is cold the scan tool will display near 5 volts and as the seat temperature rises the signal voltage will decrease to near 0.0 volts.

Displays 0 to 5 volts for the current position of the seat. When the driver seat is at the rearward stop the volts are near 0. As the driver seat is moved forward the voltage will increase until the forward stop is reached where the voltage will be near 5 volts.

Displays 0 to 5 volts for the current position of the seat. When the front of the driver seat is at the down stop the volts are near 0. As the rear of the driver seat is raised the voltage will increase until the up stop is reached where the voltage will be near 5 volts.

Displays 0 to 5 volts for the current position of the seat. When the rear of the driver seat is at the down stop the volts are near 0. As the rear of the driver seat is raised the voltage will increase until the up stop is reached where the voltage will be near 5 volts.

Displays the current value in the driver seat module for the last memory button pressed.

Displays the current value in the driver seat module for the last memory setting.

Displays the current value in the driver seat module for the seat horizontal position when using the memory switch 1 to recall a set position.

Displays the current value in the driver seat module for the seat horizontal position when using the memory switch 2 to recall a set position.

Displays the current value in the driver seat module for the seat rear vertical position when using the memory switch 1 to recall a set position.

Displays the current value in the driver seat module for the seat rear vertical position when using the memory switch 2 to recall a set position.

Displays the current value in the driver seat module for the seat front vertical position when using the memory switch 1 to recall a set position.

Displays the current value in the driver seat module for the seat front vertical position when using the memory switch 2 to recall a set position.

The scan tool displays the date upon which the driver seat module (DSM) was manufactured.

The scan tool displays the actual value for the MEC in the DSM. This information is for the assembly plant only.

The scan tool displays the part number assigned to the DSM that is currently in the vehicle.

The scan tool displays the year upon which the DSM was manufactured.

The scan tool displays the version of the software part number in the DSM.

The scan tool displays the software identification number (ID) in the DSM.