LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Malibu Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Servicing >> Removal & Installation >> Vehicle Speed Sensor >> Installation

Vehicle Speed Sensor: Installation

  1. Clean and dry the vehicle speed sensor.
  2. Install the vehicle speed sensor and the retaining stud. See Figure . Tighten the stud to specification. See TORQUE SPECIFICATIONS  .
  3. Install the electrical connector at the sensor.
  4. Remove the safety stands.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals