LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Malibu Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Servicing >> Removal & Installation >> Shift Control Cable >> Removal

Shift Control Cable: Removal

  1. Set the park brake and chock the wheels.
  2. Remove the cable (4) at the transaxle (2) shift control assembly (3). See Fig 1 .
  3. Remove the cable at the transaxle cable bracket. See Fig 2 .
  4. Remove the center console. See REMOVAL & INSTALLATION in appropriate SHIFT INTERLOCK SYSTEMS article.
  5. Remove the cable at the shift control assembly. See Fig 3 .
  6. Remove the cable grommet at the cowl.
  7. Remove the cable from the vehicle.
Fig 1: Identifying Shift Cable Components At Transaxle
G00088329Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Cable At Transaxle Bracket
G00088330Courtesy of GENERAL MOTORS CORP.
Fig 3: Removing & Installing Cable Retainer Clip At Floor Shift Control
G00088331Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals