LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Malibu Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Keyless Entry System >> Repair Instructions >> Transmitter Battery Replacement >> Installation Procedure

Installation Procedure

  1. Install the battery (2) with the positive side down into the transmitter.
  2. Ensure that the seal (7) is in position. Align the two halves of the case (6, 4), and snap the two halves together.
  3. Verify the operation of the transmitter.
  4. A malfunctioning transmitter may need resynchronization. Refer to TRANSMITTER SYNCHRONIZATION  .
    Fig 1: Installing Battery Into Transmitter
    G01590206Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals