LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala Police >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Cruise Control Module & Shock Tower Nuts
    GM301676Courtesy of GENERAL MOTORS CORP.
  1. Install the cruise control module on the mounting studs located on the shock tower.
    2. Fig 2: Cruise Control Module & Cable
    GM301671Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the cruise control module mounting nuts.

    Tighten:  Tighten the cruise control module to shock tower nuts to 2 N.m (18 lb in).

  3. Connect the cruise control module electrical connector.
    4. IMPORTANT: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable.
  4. Install the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement (3.4L)  or Cruise Control Cable Replacement (3.8L) .
scientia non olet · About LEMON Manuals