LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala LS >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Adjustment Procedures >> Repair Instructions >> Rear Camber Adjustment >> Installation Procedure

Installation Procedure

    Fig 1: Adjusting Rear Camber
    GM156938Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the strut to the vehicle. Refer to Strut Assembly Replacement in Rear Suspension.

    Tighten:  Tighten the strut-to-knuckle bolts as far as to allow movement of the knuckle.

  2. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Adjust the camber (1).

    Tighten:  Tighten the strut-to-knuckle bolts to 122 N.m (90 lb ft).

  4. Lower the vehicle.
scientia non olet · About LEMON Manuals