LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala LS >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust System Insulator, Hanger, Bracket Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Exhaust Pipe Hanger, Exhaust Pipe & Exhaust Hanger Bracket
    GM892635Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Support the exhaust system.
  3. Remove the exhaust pipe hanger (3) from the exhaust pipe (2) and the exhaust hanger bracket (1).
  4. Fig 2: Exhaust Pipe Hanger
    GM373046Courtesy of GENERAL MOTORS CORP.
  5. Remove the exhaust pipe hanger from the exhaust pipe and the exhaust hanger bracket.
  6. Fig 3: Exhaust Pipe Rear Hangers
    GM194710Courtesy of GENERAL MOTORS CORP.
  7. Remove the exhaust pipe rear hangers from the muffler and the rear exhaust hanger brackets.