LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala LS >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Hanger Mounting Bracket Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Exhaust Pipe Rear Hanger Insulators
    GM289499Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. NOTE: Refer to Catalytic Converter Movement Notice in Cautions and Notices.
  2. Support the exhaust system.
  3. Remove the exhaust pipe rear hanger insulators from the exhaust muffler rear hanger bracket.
    4. Fig 2: Exhaust Muffler Rear Hanger Bracket
    GM194726Courtesy of GENERAL MOTORS CORP.
  4. Loosen the outboard rear bumper impact bar bolt.
  5. Remove the inboard rear bumper impact bar bolt.
  6. Remove the exhaust muffler rear hanger bracket.
scientia non olet · About LEMON Manuals