LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala LS >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Lumbar Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Installing Lumbar Control Switch Screws
    GM787091Courtesy of GENERAL MOTORS CORP.
  1. Position the lumbar control switch to the outer seat cushion trim panel.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the screws (1) to the lumbar control switch.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  3. Install the outer seat cushion trim panel. Refer to Trim Panel Replacement - Front Seat .
scientia non olet · About LEMON Manuals