LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala Base, 3.8 K >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Repair Instructions >> Console Replacement - Overhead >> Removal Procedure

Removal Procedure

  1. Remove the screw from the front of the console.
    2. Fig 1: Disengaging/Engaging Console Retainers
    GM788716Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The overhead console retainers are located on the switch side of the assembly.
  2. Use a small, flat-bladed tool in order to release the 2 retainers. Press the retainers to the side to release the assembly.
    3. Fig 2: Overhead Console Electrical Connectors
    GM546559Courtesy of GENERAL MOTORS CORP.
  3. Remove the overhead console from the headliner.
  4. Disconnect the electrical connectors from the overhead console.
    5. Fig 3: Overhead Console & Drivers Information Center Module
    GM788711Courtesy of GENERAL MOTORS CORP.
  5. Remove the overhead console from the vehicle.
  6. Remove the screws from the drivers information center module.
  7. Remove the drivers information center module from the overhead console.
scientia non olet · About LEMON Manuals