LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Adjustment Procedures >> Repair Instructions >> Rear Toe Adjustment

Rear Toe Adjustment

  1. Loosen the rear suspension adjustment link lock nut (1).
    Fig 1: Adjusting Rear Toe
    G01419339Courtesy of GENERAL MOTORS CORP.
  2. Rotate the inner tie rod (2) to the required toe specification setting. Refer to WHEEL ALIGNMENT SPECIFICATIONS .
    NOTE: Refer to FASTENER NOTICE .
  3. Tighten the rear suspension adjustment link lock nut.

    Tighten 

    Tighten the rear suspension adjustment link lock nut to 60 N.m (44 lb ft).

  4. Check the toe setting after tightening.
  5. Adjust the toe setting if necessary.
scientia non olet · About LEMON Manuals